|
Body
Construction
|
Sub Frame: 12.7cm x 5 x 6mm (5"
x 2") runner with 10 x 5cm x 2.5mm thickness
bearer at 40cm (16") centres. Plastic wheel
arches and spray suppression.
Floor: 24mm Aluminium plank overlaid with 17mm heavy
duty rubber mats
Roof: 5 element insulated roof panel with aluminium
reinforcement7 x 40cm x 40cm (16" x 16")
skylight with zinc plated guards on roof
Front: No cab access, body does not join cab
Rear: High level GRP light moulding with 4 x continental
trailer lights and 2 spot reversing lights (duplicate
lights at bottom, below ramp)Rubber buffer on rear
underun
Skirts: Aluminium skirts with GRP wheel arches,
complete with skirt lockers in available space (dependent
on size of diesel tanks and number of spare wheels
carried - if any)Amber side marker lights to legal
specification recessed into top of skirts on O/S
and N/S
Ramp: 40 x 40 SHS welded frame with aluminium planking
to grip top rubber matting with 7 x hardwood slats
(one piece ramp matting with rubber runners available
on request - please specify)1 Rear ramp faced in
16g aluminium with hydraulic operation and manual
fail-safe mechanism
Windows: 10 x 30.5 x 58.4 cm (12"x 23")
side sliding on O/S10 x 50.8 x 68.5 cm (20"
x 27") N/S 3 piece slide windows1 x 20"
x 27" in each groom's door 3 piece slide windowsCage
doors to each groom's doorWindow bars on N/S windows
General: Side reversing lamps
|
|
Horse
Area
|
|
Body length suggested on 76cm (30")
stalls - please specify if any alteration
required
61cm (2ft) walkway in front of partitions
9 x herringbone partitions 152cm (5ft) high,
15cm (6") off floor with 2 x horsebox
poles fixed to floor and roof, and 17mm
GRP panel with ali capping top and bottom
Full size partitions
Sniffer boards hinged from partition and
pinned to N/S wall
2 x tie up rings per stall - please specify
if any external rings are required
183cm (6ft) ramp gates with 1 x pole on
each set of gates
Partitions to be numbered and correspond
in box
6 x N/S recessed interior lights
Box to be lined in 12mm phenol coated plywood
and kick protection
|
|
|
Seating
Area Specification
|
|
Seating Area:
Night heater Two ring hob
Bench seat Fold-down table
Cupboard Wall cupboard
External
2 x 70 litre water tanks with tap and access
flap
Tack lockers in available space
Paintwork and graphics in your livery -
to be agreed with GSH Ltd
|
|
|
Optional
Extras: price on application
|
|
CCTV
|
|
|
Photos
|
|
Please note: it is essential that the GVW
is not exceeded when fully laden. The legal
operation of the vehicle remains the responsibility
of the user/purchaser. Therefore George
Smith Horseboxes respectfully suggests that
intending purchasers establish the unladen
weight of the vehicle of their choice, and
also of their intended payload. George Smith
Horseboxes recommends that all vehicles
are started and driven weekly. We reserve
the right to alter specification without
notification in order to maintain our policy
of continuous improvement.
|
|
| |
|
|
