|
Body
Construction
|
A 12 stall polo vehicle based on
a Scania with rear ramp.
Cab 2.31 meters (7.58ft) Estimate Body length 9.05
meters (29.7 ft) Overall vehicle length 11.36 meters
(37.3ft).
Sub Frame 12.7cm x 5 x 6mm (5" x 2") runner
with 10 x 5cm x 2.5 mm thickness bearer at 40cm
(16") centres Plastic wheel arches and spray
suppression.
Floor 24mm Aluminium plank overlaid with 17mm heavy
duty rubber mats
Roof 5 element insulated roof panel with aluminium
reinforcement3 electric fans (switched in cab)7
x 40cm x 40cm (16"x16") skylight with
zinc plated guards on roof
Front No Cab access, body does not join cab2 x 30.5cm
x 58.4cm (12"x23") windows in bulkhead
wall
Rear High level GRP light moulding with 4 x continental
trailer lights and 2 spot reversing lights (Duplicate
lights at bottom below ramp)Rubber buffer on rear
underun.
Skirts Aluminium skirts with GRP wheel arches, complete
with skirt lockers in available space (dependent
on size of diesel tanks and number of spare wheels
carried - if any)Amber side marker lights to legal
specification recessed into top of skirts on O/S
and N/S.
Ramp 40x40 SHS welded frame with aluminium planking
to grip top rubber matting with 7 x hardwood slats
(one piece ramp matting with rubber runners available
on request, please specify)1Rear ramp faced in 16g
Aluminium with Hydraulic operation and manual fail-safe
mechanism.
Windows 2 x 30.5 x 58.4cm (12"x23") bulkhead
wall 12 x 30.5x58.4cm (12"x23") side sliding
on O/S12x 50.8 x 68.5cm (20"x27") N/S
3 piece slide window 1x20''x27'' in each grooms
door 3 piece slide windowCage doors to each grooms
doorwindow bars on N/S windows
|
|
Horse
Area
|
|
Body length suggested on 76cm (30")
stalls (please specify if any alteration
required
61 cm (2ft) walkway in front of partitions
11 x herringbone partitions 152cm (5ft)
high15cm (6") of floor with 2 x horsebox
poles fixed to floor and roof and 17mm GRP
panel with Ali capping top and bottom
Telescopic partitions a no cost option
Sniffer boards 60cm x 91cm (2ft x 3ft) approx
hinged from partition and pinned to n/s
wall.
Padding above horses heads on roof and on
ramp gates and partitions and at rear
2 x tie up rings per stall (please specify
if any external rings are required
183cm (6ft) ramp gates with 1 x pole on
each set of gates
Partitions to be numbered and correspond
in box
Drain holes in the floor of every stall
6 O/S x 6 N/S recessed interior lights switched
in box master switch in cab
Rug rack in GRP
Box to be lined in 12mm phenol coated ply
wood and kick protection
|
|
|
External
Specification
|
|
2 x 70 litre water tanks with tap and access
flap
Tack lockers in available space
Width - Legal Max
Length 37.3ft approx
Paintwork and Graphics to be finished in
a single non-metallic colour of your choice,
with your sign writing and graphics - to
be agreed with GSH
|
|
|
Optional
Extras: price on application
|
|
CCTV
|
|
|
Photos
|
|
Please note: it is essential that the GVW
is not exceeded when fully laden. The legal
operation of the vehicle remains the responsibility
of the user/purchaser. Therefore George
Smith Horseboxes respectfully suggests that
intending purchasers establish the unladen
weight of the vehicle of their choice, and
also of their intended payload. George Smith
Horseboxes recommends that all vehicles
are started and driven weekly. We reserve
the right to alter specification without
notification in order to maintain our policy
of continuous improvement.
|
|
| |
|
|
